Mixing Tires – Bad Idea

February 25th, 2016

In a perfect world, all four tires would wear out at the same time. In the same perfect world, everyone would be able to afford a whole set of tires all at once. Unfortunately, things often just do not work out that way. 

Sometimes you may just have to replace tires as you can afford them, one or two at a time, but there are some important things to bear in mind if you have to do that. 

If you can only afford to replace one or two tires, it’s essential that you go with tires that are identical (or at least as close as possible) to the car’s remaining tires. That means that internal construction, size, tread pattern and design should be close to the same. Don’t mix winter tires with all-season tires, don’t mix run-flat tires with ...[more]

  Posted in: Tire 101

Get The Most Out Of That Set Of Tires

January 28th, 2016
Your tires are a pretty big investment. Even with the cheapest set of tires, you’re going to be spending upwards of $400 on the tires, mounting, balancing, disposal fees and taxes. Since you laid down that kind of money, doesn’t it just make sense to make sure you get the most miles possible out of them? 
Here’s some advice on long tire life:
 
Regularly check your tire pressure. This one is really, really important. Underinflated tires will wear 
unevenly and reduce your fuel economy due to increased rolling resistance. That increased rolling resistance also means more heat, which will break down the tires’ internal structure and sh ...[more]
  Posted in: Tire 101

Are All-Season Tires Really All-Season?

September 11th, 2015
We frequently get questions about all-season tires when consumers are trying to make the right purchasing decision for  a set of new tires. As the title of the blog asks…”are all-season tires really all-season?”
 
The answer is: it that depends on what part of the country you’re living in.
 
All-season tires are a compromise from the very start. They’re designed for a forgiving ride, low noise, decent handling and good road manners. Maybe not as much as what a good set of grand touring tires can deliver, but pretty respectable…and also with an aggressive tread pattern which 
channels water away from the tire’ ...[more]
  Posted in: Tire 101

Do Your Homework on Tire Safety

August 13th, 2015
We see it all the time…people tend to not think about their tires until something goes wrong. Sometimes, this can mean sitting on the side of the road waiting for help, and other times it can mean more serious consequences. Here are a few things to remember for tire safety as the summer winds down and back-to-school season starts.

Check your tire pressure regularly. This one is really important. Your car’s tires will lose air through the valve over time, and an underinflated tire will hurt fuel economy due to added rolling resistance. Low tires also affect handling and will generate enough heat that they can shorten the tire’s lifespan. Get a quality tire gauge (the dial type, not the pencil type) a ...[more]
  Posted in: Tire 101

Determining the Age of a Tire

February 14th, 2014
When it comes to determining the age of a tire, it is easiest to identify when the tire was manufactured by reading its Tire Identification Number (often referred to as the tire’s serial number or DOT number). Unlike vehicle identification numbers (VINs) and the serial numbers used on many other consumer goods (which identify one specific item), Tire Identification Numbers are really batch codes that identify several components.
 
The U.S. Department of Transportation (DOT) National Highway Traffic Safety Administration (NHTSA) requires that Tire Identification Numbers be a combination of the letters DOT, followed by ten, eleven or twelve letters or numbers that identify the manufacturing location, tire size and manufacturer's code, along with the week and year the tire was ma ...[more]
  Posted in: Tire 101